3.5     Tools Menu


Tools in Tools menu check the real-time status of the selected devices. You can export the accumulated results by clicking on the CSV button (  ) at the 

upper- right corner in the corresponding view in the status pane.

 

Figure  3.5.1: Tools Menu.

blob1477698360078.png


3.5.1   DNS Lookup

It shows the result of DNS name resolution of the devices.


blob1477698366468.png


3.5.2   IOS Show Commands

It runs IOS Show commands on the device and shows the results.  In the list, there are several commands you run. Note that this operation is available

only on devices that are Cisco IOS compatible.

Select which command to run on the device. Then click on the Execute button.

 

blob1477698382437.png


An example of running show arp  on the selected devices with the IOS Show

Commands.


blob1477698423655.png


3.5.3   IP Routing Table

It shows the routing information of the device.

 

blob1477698430833.png


3.5.4   Ping

It sends a ping to the device and shows its response.


 

blob1477698439940.png


3.5.5   SNMP System Info.

It shows the SNMP system information of the devices.

 

blob1477698456393.png


3.5.6   Interface Brief

It shows the IP addresses of the device and UP/DOWN status of the interfaces on it.


blob1477698465789.png


3.5.7   Traceroute

Sends traceroute to the devices and shows the responses.


blob1477698472780.png


3.5.8   Port Scan

Shows port usages of the devices.


blob1477698479301.png


3.5.9   Live ARP Table

Shows the real-time status of ARP table of the devices.


blob1477698494838.png